18mm ABL Mounts 3D Printer Model
The file '18mm ABL Mounts 3D Printer Model' is (stl) file type, size is 36.1KB.
The file '18mm ABL Mounts 3D Printer Model' is (stl) file type, size is 36.1KB.
Probe offset is -56.6 X, 5.5 Y for both mounts.
Regular - Overlaps the motor mount
ALT - Goes on the side of the fan
Made these two mounts to fit on the left side of the carriage since I didn't have a BLTouch but I did have a 18mm capacitive probe. One mount goes directly on the fan mount (or can forgo the fan entirely which would make the X offset -39.4) and the other goes over the motor mount. I printed both in PETG and they both work well but I recommend the one that mounts on the fan more as it's more rigid.
There's 2 grub screws on the side (3mm diameter) to secure it in place. The things that came with my probe to screw it in place are too big to use so grub screws may be neccessary for you.
The fan mounted one is called alt because I made it afterwards after having the idea of using a longer screw to mount it to the fan. To make it level with the regular fan mount, I didn't make the bottom part thicker so if you mount it to the fan, you will need a spacer.
I mounted this on an Ender 3 Pro with the Extender 400XL so it was designed with this in mind. If the X motor cover is smaller than the Ender 3 one, it should work no problem with your printer.
| 18mm_ABL_Alt_Mount.stl | 68.2KB | |
| 18mm_ABL_Mount.stl | 56.1KB |
