18650 PCB Case Mod’d UPS Battery 3D Printer Model
The file '18650 PCB Case Mod’d UPS Battery 3D Printer Model' is (stl) file type, size is 509.8KB.
The file '18650 PCB Case Mod’d UPS Battery 3D Printer Model' is (stl) file type, size is 509.8KB.
Remix of "Wemos 18650 charge circuit shield case" incorporating adjustments.
First, my slicer/printer refused to deal properly with the screw holes on the bottom so those are changed to use flat head screws.
My PCB's USB A ports were attached out of alignment so the print opening is widened side to side.
To be able to "see" the LEDs on the board there's now a thin section in the bottom piece.
Added some “posts” to the tops of both pieces to help with alignment and strength.
And finally, to indicate which position the switch is, there's a "0 for off" and a "1 for on".
| 18650_PCB_Case_Modd.stl | 654.7KB | |
| 18650_PCB_Case_Modd_bottom.stl | 152.0KB | |
| 18650_PCB_Case_Modd_top.stl | 501.2KB |
