A simple 4-wire battery test jig that holds 18650 battery. This clip using 10A battery current probe with soldering end.
I used PLA at 211degC, 0.2 mm layer height.
If you will use it under high current ,such as 5A, ABS is recommend.
The original design is reference to https://www.thingiverse.com/thing:38216
| clip_18650_21700_tester_V2.scad | 1.2KB | |
| clip_18650_tester.scad | 1.2KB | |
| clip_18650_tester.stl | 303.8KB | |
| clip_21700_tester.stl | 292.4KB |
