16mm Quarry Hunslet 3D Printer Model
The file '16mm Quarry Hunslet 3D Printer Model' is (stl) file type, size is 2.7 MB.
The file '16mm Quarry Hunslet 3D Printer Model' is (stl) file type, size is 2.7 MB.
NOTE : These files are provided as is. They are not for commercial use and no deviations, please read the license carefully.
Here we have a 3ft gauge Quarry Hunslet, it can be made as either Stephen or Hughie. They are disigned to fit 45mm garden railway track.
Some of the parts are fine detail and should be printed in resin, others main bulky parts you will get away with PLA/PLA+/ABS etc,
Uses a standard 280 motor with a 30 tooth plastic gear which I think is 16mm round and a plastic worm gear 10mm long. Alxes are 3mm, bushes you will need brass pipe of 2mm ID and 3mm ID. A mix or M2 and M3 screws / nuts used.
Any questions just let me know.
| HUGHIE_Name_Plate.stl |
| Hughie_Works_Plate_706.stl |
| Large_Handrail_Knob_End.stl |
| Large_Handrail_Knob_Through.stl |
| Stephen_Backhead_V2.stl |
| Stephen_Boiler.stl |
| Stephen_Brake_Handle.stl |
| Stephen_Brake_Stand_Base.stl |
| Stephen_Cab_Back.stl |
| Stephen_Cab_Front.stl |
| Stephen_Cab_Left.stl |
| Stephen_Cab_Right.stl |
| Stephen_Chassis_Centre_Supports.stl |
| Stephen_Chassis_Side_Left.stl |
| Stephen_Chassis_Side_Right.stl |
| Stephen_Chimney.stl |
| Stephen_Coal_Bunker.stl |
| Stephen_Coal_Large.stl |
| Stephen_Coal_Small.stl |
| Stephen_Conrod_Drive.stl |
| Stephen_Conrod_Piston.stl |
| Stephen_Crossheads.stl |
| Stephen_Cylinder_Covers_Front.stl |
| Stephen_Cylinder_Covers_Rear.stl |
| Stephen_Firebox_V2.stl |
| Stephen_Footplate_V2_with_sides.stl |
| STEPHEN_NAME_PLATE.stl |
| Stephen_Pipe_Bent_180_RESIN.stl |
| Stephen_Pipe_Joiner_RESIN.stl |
| Stephen_Port_Hole_Needs_8.stl |
| Stephen_Regulator_Handle.stl |
| Stephen_Reverser_Lever.stl |
| Stephen_Reverser_Linkage.stl |
| Stephen_Roof_V2.stl |
| Stephen_Sandpot.stl |
| Stephen_Slidebar_Holder.stl |
| Stephen_Smokebox.stl |
| Stephen_Smokebox_Door.stl |
| Stephen_Spring_Hanger.stl |
| Stephen_Steam_Dome_Full.stl |
| Stephen_Steps.stl |
| Stephen_Watertank_Filler_Cap.stl |
| Stephen_Water_Gauge.stl |
| Stephen_Water_Tanks_Saddle_V2.stl |
| Stephen_Wheel.stl |
| Stephen_Whistle.stl |
| Stephen_Works_Plate_771.stl |
