16mm Pole Tray 3D Printer Model
The file '16mm Pole Tray 3D Printer Model' is (stl) file type, size is 157.8KB.
The file '16mm Pole Tray 3D Printer Model' is (stl) file type, size is 157.8KB.
A tray that attaches to the vertical frame pipes of a greenhouse or a grow tent. I designed this for my thermo-/hygrometer that has just one leg to support it and no attachment points, and therefore cannot be positioned reliably anywhere except directly in the soil (not ideal).
Can also be used for holding other small items, I've printed multiple of these so my tent has lots of vertical storage that would otherwise go to waste.
If you have an extraction fan in your tent and your items are large enough, the negative pressure created by the fan might cause the walls of the tent to get sucked in so much that they knock down whatever is on the tray. The problem can be circumvented by tying a piece of string or metal wire around the pole and what you intend on storing on top of the tray; this won't be an issue for smaller items though. Best solution I found was to drill a hole in the plastic leg of my cheap thermometer and run a piece of string through it.
| 16mm_tray.stl | 657.4KB |
