A three lane 180 turn, this is a rebuild of a 1 year old turn using all the things i've learned in the last year. It allows for smooth 180 racing across 3 lanes. Cars with poor clearance do just barely high center in the middle but they still perform well overall.
I print these pieces pointing up with no supports, if your cooling isn't up to par you may have some problems with the parts pointing up in the air.
You will want to print:
See this curve in action: https://youtu.be/BUgLgFlRq9E
Update 20240704: Added 90 adapter which can allow you to make a 3 lane 90. The 90 adapter replaces the LeftBack and RightBack to make a pretty smooth 3 lane 90.
| 90_adapter.stl | 716.1KB | |
| HWTrackConnector.stl | 154.2KB | |
| LeftBack.stl | 714.4KB | |
| LeftEntry.stl | 370.3KB | |
| LeftMid.stl | 429.8KB | |
| RightBack.stl | 836.4KB | |
| RightEntry.stl | 308.7KB | |
| RightMid.stl | 395.5KB | |
| SlimConnectorNew.stl | 25.3KB |
