This is a fairly high precision model. Your printer should be accurate to 1/10th of a mm or less for best results. You may want to print at 40% infill and 3 perimeters for strength.
You will need to print 6 of the planet gear, 2 of the ring gear, 2 of the mounting bracket and one of everything else. There is an assembly instructional video that you should probably watch before attempting to put it together.
Linked here:
https://youtu.be/PxOzA0gjQwE
| Clutch_Bell.stl | 173.8KB | |
| Clutch_plate_output_shaft.stl | 227.8KB | |
| Clutch_support_peg.stl | 11.8KB | |
| Cover.stl | 700.7KB | |
| finger_knob.stl | 67.1KB | |
| Input_Carrier_V2.stl | 244.8KB | |
| input_housing.stl | 689.2KB | |
| Input_knob.stl | 2.6MB | |
| Input_sun_gear.stl | 186.6KB | |
| Mounting_Bracket.stl | 126.4KB | |
| output_carrier_V2.stl | 230.7KB | |
| Output_shim_ring.stl | 49.3KB | |
| output_sun_gear.stl | 190.5KB | |
| planet_gear.stl | 180.9KB | |
| ring_gear.stl | 706.0KB | |
| Shim_Ring.stl | 49.3KB | |
| Template.stl | 314.1KB |
