1/6 NBA Basketball Backstop 3D Printer Model
The file '1/6 NBA Basketball Backstop 3D Printer Model' is (stl) file type, size is 985.8KB.
The file '1/6 NBA Basketball Backstop 3D Printer Model' is (stl) file type, size is 985.8KB.
A Semi complete and Semi modular NBA backstop for 1/6 scale figures.
this is extremely large and requires 2mm acrylic sheet for the back board, and whatever you choose to finish it with.
I made this for my Enterbay figure, and I think it came out great. its pretty straight forward to build, it will take time and a bit of glue and patience,
It does require a counter weight and there is a bucket part you can fill with 1KG sand bag. (Weight Vest Weight)
| Backboard_Arm_Left.stl | 31.0KB | |
| Backboard_Arm_Right.stl | 31.0KB | |
| Backboard_Mount.stl | 40.9KB | |
| Backboard_Padding_Left.stl | 239.9KB | |
| Backboard_Padding_Right.stl | 220.2KB | |
| Base_Front.stl | 22.5KB | |
| Base_Top_Left_Join.stl | 2.7KB | |
| Base_Top_rear.stl | 9.0KB | |
| Base_Top_Right_Join.stl | 2.7KB | |
| Boom_1.stl | 73.7KB | |
| Boom_2.stl | 57.3KB | |
| Boom_3.stl | 53.0KB | |
| Boom_4.stl | 94.7KB | |
| Boom_5.stl | 74.7KB | |
| Boom_6.stl | 45.2KB | |
| Bottom_Left_Join.stl | 2.6KB | |
| Bottom_Rear_Base.stl | 18.0KB | |
| Bottom_Right_Join.stl | 2.6KB | |
| Foot.stl | 42.3KB | |
| Front_Arm_Padding.stl | 3.2KB | |
| Front_Base_Padding.stl | 7.3KB | |
| Front_Support_1.stl | 7.2KB | |
| Front_Support_2.stl | 5.2KB | |
| Front_Support_3.stl | 14.3KB | |
| Front_Support_Padding_1.stl | 6.7KB | |
| Front_Support_Padding_2.stl | 1.8KB | |
| Front_Support_Padding_3.stl | 1.4KB | |
| Front_Support_Rod.stl | 27.2KB | |
| Front_Support_Spacer_x2.stl | 48.7KB | |
| Full_Hoop.stl | 1.8MB | |
| Handle_x2.stl | 150.9KB | |
| Hydraulic_Support.stl | 36.7KB | |
| Left_Backboard.stl | 3.2KB | |
| Left_Side_Padding.stl | 8.4KB | |
| Rear-Support_Rod.stl | 29.6KB | |
| Rear_Camera_Mount.stl | 15.3KB | |
| Rear_Support.stl | 24.4KB | |
| Rear_Support_Spacer_x2.stl | 43.3KB | |
| Right_Backboard.stl | 2.8KB | |
| Right_Side_Padding.stl | 8.4KB | |
| Ring_1.stl | 384.8KB | |
| Ring_2.stl | 48.5KB | |
| Screen_Joiner.stl | 5.4KB | |
| Screen_Left.stl | 3.8KB | |
| Screen_Right.stl | 3.8KB | |
| Top_Backboard.stl | 25.5KB | |
| Weight_Bucket.stl | 5.0KB | |
| Weight_Bucket_Lid.stl | 53.4KB |
