16 Fidget Spinners 3D Printer Model
The file '16 Fidget Spinners 3D Printer Model' is (zip,STL) file type, size is 2.9MB.
The file '16 Fidget Spinners 3D Printer Model' is (zip,STL) file type, size is 2.9MB.
To be used with basic 608ZZ 8X22X7 mm ball bearings. De-grease before inserting for best results.
Nomenclature - F(# of holes).(version as seen in display picture) - (revision #)
Get one 3D printed here - https://www.fabshop3d.com/
| Full_SW_Assembly_Dec._2016.zip | 2.2MB | |
| Plug_with_8.4mm_Shaft_Diameter_tighter_fit.STL | 25.9KB | |
| STL_-_F1.1-1.STL | 20.4KB | |
| STL_-_F2.1-1.STL | 165.1KB | |
| STL_-_F2.2-1.STL | 27.6KB | |
| STL_-_F2.3-1.STL | 267.7KB | |
| STL_-_F3.1-1.STL | 154.0KB | |
| STL_-_F3.2-1.STL | 36.4KB | |
| STL_-_F3.3-1.STL | 161.8KB | |
| STL_-_F3.4-1.STL | 359.1KB | |
| STL_-_F3.5-1.STL | 309.8KB | |
| STL_-_F4.1-1.STL | 368.7KB | |
| STL_-_F4.2-1.STL | 52.0KB | |
| STL_-_F4.3-1.STL | 70.8KB | |
| STL_-_F4.4-1.STL | 76.3KB | |
| STL_-_F4.5-1.STL | 322.2KB | |
| STL_-_F4.6-1.STL | 74.3KB | |
| STL_-_F4.7-1.STL | 79.0KB | |
| STL_-_Plug-1.STL | 25.9KB |
