150g Flipper Battlebot Modifications 3D Printer Model
The file '150g Flipper Battlebot Modifications 3D Printer Model' is (stl) file type, size is 146.7KB.
The file '150g Flipper Battlebot Modifications 3D Printer Model' is (stl) file type, size is 146.7KB.
These are modifications I made to emancarrillo's 150g Flipper Battlebot.
I modified the body of the robot so you can replace wedges that get damaged in fights and added custom wedges based on the FingerTech Viper's wedge. I made modifications to the flipper lever and printed a custom servo arm so it could flip higher. The servo arm works on the Corona DS929HV servo. I also made the top flipper wedge longer so it is able to self right. The screw holes in the flipper body might need to be drilled slightly wider to fit the screws. A 7/64 drill bit worked best for me.
You will still have to print the top plates, flipper arms, top cover, and wheels from emancarrillo's original design.
Enjoy! :)
| Flipper_arm.stl | 25.9KB | |
| flipper_base.stl | 199.6KB | |
| Flipper_Wedge_Bottom.stl | 63.9KB | |
| flipper_wedge_top.stl | 61.1KB | |
| Nail_spacer_long_mod.stl | 19.8KB | |
| nail_spacer_short_mod-3.stl | 17.9KB | |
| Servo_arm.stl | 55.5KB | |
| Wedge_left.stl | 24.9KB | |
| Wedge_right.stl | 24.9KB | |
| Wedge_V2.stl | 18.3KB |
