Made this to organize my toolbox.
this is everything I have in 1/4 inch.
The top room I made for my torque wrench.
If you want to edit the thing yourself the Thinkercad link is:
https://www.tinkercad.com/things/1aropH0PyLg-14-sockets/edit
This dowetail system is what i used for all my designs: so it schould fit together if you want to mix them up.
Can not guarantee that it will fit your sockets, but all the inch sockets are from Harbour freight.
And the metric ones are from Bacho.
The long metric sockets are from Bosch.
3/8 and 1/2 will be coming out soon.
I have deigned some of the deign, but like to print it before I post, so i'm sure that it fits.
Don't have the patience?
Here are my temp designs:
https://www.tinkercad.com/things/kQqsaf0DHhi-38-sockets/edit
https://www.tinkercad.com/things/0w1bnSGRWck/edit
| 14mm_1.4_long_sockets_Part_1.stl | 415.2KB | |
| 14mm_1.4_long_sockets_Part_2.stl | 160.1KB | |
| 14mm_1.4_sockets.stl | 1.0MB | |
| 2x2_compartment.stl | 57.8KB | |
| 2x2_Long_torx.stl | 491.2KB | |
| 2x2_random_sockets.stl | 261.8KB | |
| 2x4_wrench_and_screwdriver_compartment_part_1.stl | 191.7KB | |
| 2x4_wrench_and_screwdriver_compartment_part_2.stl | 38.2KB | |
| 2x5_compartment_part_1.stl | 195.6KB | |
| 2x5_compartment_part_2.stl | 38.2KB | |
| 3.16-3.16_1.4_sockets.stl | 1.2MB | |
| 3x1_compartment.stl | 58.7KB | |
| 5.32-1.2_1.4_long_sockets_Part_1.stl | 471.0KB | |
| 5.32-1.2_1.4_long_sockets_Part_2.stl | 758.6KB | |
| 9x2_long_compartment_part_1.stl | 104.7KB | |
| 9x2_long_compartment_part_2.stl | 17.7KB | |
| 9x2_long_compartment_part_3.stl | 104.7KB |
