This is a 1/4" threaded 6mm x 24mm, 26mm, 28mm or 30mm cell phone holder thumb nut and 1.2mm thick washer. Print the nut in PLA and matching washer size in TPU.
| Nut_24mm_v1.stl | 207.6KB | |
| Nut_26mm_v1.stl | 247.8KB | |
| Nut_28mm_v1.stl | 249.8KB | |
| Nut_30mm_v1.stl | 253.2KB | |
| Washer_24mm_v1.stl | 32.3KB | |
| Washer_26mm_v1.stl | 31.7KB | |
| Washer_28mm_v1.stl | 31.3KB | |
| Washer_30mm_v1.stl | 30.7KB |
