1/4-20 And 5/16-18 Knob Pack 3D Printer Model
The file '1/4-20 And 5/16-18 Knob Pack 3D Printer Model' is (stl) file type, size is 2.0MB.
The file '1/4-20 And 5/16-18 Knob Pack 3D Printer Model' is (stl) file type, size is 2.0MB.
Knob pack for 1/4"-20 TPI and 5/16"-18 TPI hardware.
Includes lobed and knurled designs from 30mm to 70mm.
I recommend 18% infill at a minimum and 3 walls.
| 30mm.stl | 132.6KB | |
| 30mm_5-16.stl | 147.3KB | |
| 30mm_knurl.stl | 314.4KB | |
| 30mm_knurl_5-16.stl | 335.3KB | |
| 35mm.stl | 130.4KB | |
| 35mm_5-16.stl | 132.7KB | |
| 35mm_knurl.stl | 314.3KB | |
| 35mm_knurl_5-16.stl | 334.0KB | |
| 40mm.stl | 129.7KB | |
| 40mm_5-16.stl | 131.2KB | |
| 40mm_knurl.stl | 317.5KB | |
| 40mm_knurl_5-16.stl | 332.9KB | |
| 45mm.stl | 129.0KB | |
| 45mm_5-16.stl | 130.7KB | |
| 45mm_knurl.stl | 317.6KB | |
| 45mm_knurl_5-16.stl | 334.5KB | |
| 50mm.stl | 130.6KB | |
| 50mm_5-16.stl | 130.6KB | |
| 50mm_knurl.stl | 317.4KB | |
| 50mm_knurl_5-16.stl | 334.4KB | |
| 55mm.stl | 132.0KB | |
| 55mm_5-16.stl | 131.2KB | |
| 55mm_knurl.stl | 316.4KB | |
| 55mm_knurl_5-16.stl | 334.4KB | |
| 60mm.stl | 130.6KB | |
| 60mm_5-16.stl | 131.4KB | |
| 60mm_knurl.stl | 316.3KB | |
| 60mm_knurl_5-16.stl | 333.5KB | |
| 65mm.stl | 129.7KB | |
| 65mm_5-16.stl | 131.7KB | |
| 65mm_knurl.stl | 316.5KB | |
| 65mm_knurl_5-16.stl | 334.1KB | |
| 70mm.stl | 130.1KB | |
| 70mm_5-16.stl | 131.9KB | |
| 70mm_knurl.stl | 316.4KB | |
| 70mm_knurl_5-16.stl | 333.8KB |
