1:32 Slot Car Footbridge 3D Printer Model
The file '1:32 Slot Car Footbridge 3D Printer Model' is (STL) file type, size is 52.3KB.
The file '1:32 Slot Car Footbridge 3D Printer Model' is (STL) file type, size is 52.3KB.
Take your time when printing and gluing this foot bridge and you will be as pleased with the results as I was.
If you'd like this 3D printed for you then just follow the link https://beechmontslotscenery.etsy.com/listing/1737627406
Parts quantities listed below
Lower gantry x2
Gantry side x2
Gantry top x1
End guard rail x2
Staircase outer x2
Staircase inner x2
Stairway landing x2
Stairs x2 sets
Stairway truss short-1 x4
Stairway truss short-2 x4
Stairway truss long-1 x4
Stairway truss long-2 x4
| END_GUARD_RAIL.STL | 168.1KB | |
| GANTRY_SIDE.STL | 23.7KB | |
| GANTRY_TOP.STL | 21.8KB | |
| LOWER_GANTRY.STL | 2.2KB | |
| STAIRCASE_SIDE_INNER.STL | 27.2KB | |
| STAIRCASE_SIDE_OUTER.STL | 30.2KB | |
| STAIRS.STL | 8.3KB | |
| STAIRWAY_LANDING.STL | 1.8KB | |
| STAIRWAY_TRUSS_SHORT-1.STL | 5.4KB | |
| STAIRWAY_TRUSS_SHORT-2.STL | 3.8KB | |
| STAIRWAY_TRUSS_TALL-1.STL | 14.2KB | |
| STAIRWAY_TRUSS_TALL-2.STL | 16.9KB |
