1/3 part. Fan holder. Place for soldering.
Adjustable fan holder for soldering. A USB DC 5V 80mm x 80mm fan was used. Powered by
a portable battery. It is fixed with two screws and nuts M4.
Aluminum tubes with a diameter of 8mm were used for assembly. The tubes were fixed to the plastic mounting with screws, nuts and washers M3.
The plastic parts are fixed together with screws and square nuts DIN 557.
Additionally, a DIN 557 square nut is used inside each plastic mount (1, 3 and 4 in the photo).
You will need:
5 square nuts DIN 557 M5;
2 bolt M5 12 mm;
3 bolt M5 14 mm;
5 washers M5;
2 screws M4 20mm;
2 nuts M4;
2 washers M4;
4 screws M3;
4 nuts M3;
4 washers M3;
| 1.SLDPRT | 212.9KB | |
| 1.STL | 265.2KB | |
| 2.SLDPRT | 95.1KB | |
| 2.STL | 50.1KB | |
| 3.SLDPRT | 105.7KB | |
| 3.STL | 52.4KB | |
| 4.SLDPRT | 150.2KB | |
| 4.STL | 48.2KB | |
| 5.SLDPRT | 181.0KB | |
| 5.STL | 77.2KB | |
| 6.SLDPRT | 144.7KB | |
| 6.STL | 90.9KB | |
| 7.SLDPRT | 225.6KB | |
| 7.STL | 93.8KB |
