12v Thermostat W1209 Housing, Case With Pushbuttons — W1209 Gehäuse Mit Druckknöpfen 3D Printer Model

Author: @
License: CC BY-NC-ND
File formats: stl
Download type: zip
Size:67.5KB

The file '12v Thermostat W1209 Housing, Case With Pushbuttons — W1209 Gehäuse Mit Druckknöpfen 3D Printer Model' is (stl) file type, size is 67.5KB.

Summary

W1209 Housing with press studs (screws are only needed when mounted on a wall, the cover lasts by itself).

Board: https://de.gearbest.com/sensors/pp_240514.html?wid=1433363

link to manual: http://forum.hobbycomponents.com/viewtopic.php?f=73&t=1900

Maybe you are also interested: https://www.thingiverse.com/thing:3095270

Need a fuse!?:

https://www.thingiverse.com/thing:3095801
https://www.thingiverse.com/thing:3093477

Have fun, and share you makes ...

SG

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
short instruction (press 5s the set button):

Code Description Range Default Value
P0 Heat C/H C
P1 Backlash Set 0.1-15 2
P2 Upper Limit 110 110
P3 Lower Limit -50 -50
P4 Correction -7.0 ~ 7.0 0
P5 Delay Start Time 0-10 mins 0
P6 High Temperature Alarm 0-110 OFF

Long pressing +- will reset all values to their default
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-

W1209 Gehäuse mit Druckknöpfen (Schrauben werden nur bei Wandmontage benötigt, der Deckel hält von alleine).

Board: https://de.gearbest.com/sensors/pp_240514.html?wid=1433363

Link zur Anleitung (englisch): http://forum.hobbycomponents.com/viewtopic.php?f=73&t=1900

Du brauchst noch eine Sicherung!?:

https://www.thingiverse.com/thing:3095801
https://www.thingiverse.com/thing:3093477

Have fun, and share you makes...

SG

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Kurzanleitung: (5s Setbutton drücken):

Menu:

P0 Heat C/H C
P1 Backlash Set 0.1-15 2
P2 Upper Limit 110 110
P3 Lower Limit -50 -50
P4 Correction -7.0 ~ 7.0 0
P5 Delay Start Time 0-10 mins 0
P6 High Temperature Alarm 0-110 OFF

Long pressing +- will reset all values to their default
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Thermo_Controller.stl 589.9KB
Thermo_Controller_Button.stl 133.2KB
Thermo_Controller_Top.stl 213.1KB