A basic case/enclosure for standard 12V PSU's. will fit 30/40A model (roughly 114x50mm WxH).
I've included a blank face plate so you can import into your own CAD program and put in customised holes.
supports aren't needed but you'll need to rotate the models before printing (I forgot to do it before I exported the files), mine were printed in ABS at 0.3mm layer height with 25% infill. the design is pretty open to tweaks so you can set it at what ever you want.
Naturally you'll need some hardware to finish.
| PSU_enclosure_face.stl | 206.6KB | |
| PSU_enclosure_Face_Blank.stl | 185.4KB | |
| PSU_enclosure_main.stl | 191.4KB | |
| PSU_enclosure_rear.stl | 124.1KB |
