1:29 – G SCALE ROTARY PLOW – KELSEY DESIGN 3D Printer Model
The file '1:29 – G SCALE ROTARY PLOW – KELSEY DESIGN 3D Printer Model' is (stl) file type, size is 1.1 MB.
The file '1:29 – G SCALE ROTARY PLOW – KELSEY DESIGN 3D Printer Model' is (stl) file type, size is 1.1 MB.
1:29 Scale Rotary Plow.
I have scaled down the files a little bit more than what the assembled photos show so it looks more correct with 1:29 (Aristocraft) trains.
I am not an engineer by any means, so pieces will have to be glued together.
I used brass for the steps and ladders.
I have left the wheels/trucks "blank" so people can fit their own, as many manufacturers use different sizes and attaching methods.
Rafts help when printing the roof panels, and to keep walls from warping but it's discretionary.
I printed this in PLA, and used different resolutions depending on the part.
| BACK_WALL.stl |
| CHIMNEY.stl |
| DOOR_FULCRUM.stl |
| FLOOR_1.stl |
| FLOOR_2.stl |
| FLOOR_3.stl |
| FLOOR_4.stl |
| FRONT_WALL.stl |
| HEADLIGHT.stl |
| OVERHANG_1.stl |
| OVERHANG_2.stl |
| OVERHANG_3.stl |
| RIVET_STRIP.stl |
| ROOF_1.stl |
| ROOF_2.stl |
| ROOF_3.stl |
| ROTOR.stl |
| ROTOR_DOOR.stl |
| ROTOR_HOUSING.stl |
| ROTOR_SHROUD.stl |
| SKIRTING_1.stl |
| SKIRTING_2.stl |
| SKIRTING_3.stl |
| SKIRTING_4.stl |
| SKIRTING_5.stl |
| SKIRTING_6.stl |
| STENCIL_1.stl |
| STENCIL_2.stl |
| WALL_1.stl |
| WALL_2.stl |
| WALL_3.stl |
| WALL_4.stl |
| WALL_5.stl |
| WALL_6.stl |
