1/25th Scale 69 Pro Street Chevy C10 3D Printer Model
The file '1/25th Scale 69 Pro Street Chevy C10 3D Printer Model' is (stl,zip) file type, size is 230.8MB.
The file '1/25th Scale 69 Pro Street Chevy C10 3D Printer Model' is (stl,zip) file type, size is 230.8MB.
Making this printable in 1/25th scale. But as a Pro Street Truck with chassis, interior etc. This is a work in progress. I will be adding files as I go along. I will also be including a stock version down the road. Original body design was made by by Alexby in 1/10th scale and meant for Traxxis (RC car/truck chassis). AMT did produce a 69 Chevy Fleet-side, but that kit is super rare these days. I have included a photo of that kit.
A GMC grill for the front end can be found here https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/gmc-suburban-1972. Alternative grills for the Chevy can be found here https://cults3d.com/en/3d-model/game/late-60s-and-early-70s-chevy-truck-grill-1-25th-scale-night_stone_
Let me know if you require something to be added to the files.
UPDATE: 6/01/24
Added new files, cab, doors, hood has been thickened by .3mm. They are the zip files with "thickened" added.
UPDATE: 12/29/23
Uploaded the missing file - Inner tub for the single cab
UPDATE: 12/29/23
For those who are looking for a stock interior. I came across these files for a Chevrolet Panel Truck 1970. It isn't free and is available in CGTraders, author is Andrey Bezrodny.
UPDATE: 11/26/23
Added the original doors with window frame and rear doors with window frames.
UPDATE: 9/26/23
Added two versions of truck bed, one with license plate holder in roll pan and the other with no license plate. Both of these have thicker walls as per request.
UPDATE: 9/23/23
Revised the crewcab roof, Rev A
UPDATE: 9/18/23
Revised the front grills, apparently it was missing the vertical slats.
UPDATE: 9/13/23
Reworked a few parts, all four inner door panels, console with cup holders and front seat, Rev. A
UPDATE: 9/07/23
Added rear valance no license plate space and missing rear bumper. Reworked the Ford 9" rearend, Rev B.
UPDATE: 9/07/23
Forgot to add a hole for the driveshaft in the axle. Has been updated to Rev A
UPDATE: 9/05/23
Uploaded the Single cab muffler system.
UPDATE: 9/04/23
It has been a while since I worked on this project, but I have most of the files completed and will upload them today. The original author did not have any windows, so cutting them out of other plastic would be the way to go. I have provided a front windshield is from a 72 chevy but as a buck. I don't have the skills to recreate one. All you need is to provide your own motor and wheels. I will have Chevelle wheels and MT tires on my Cults3d page if you want them. Bed has been redone; cab is finished but I can't check for errors due to its file size. Also provided a stock bed as well. I don't have a stock suspension or interior. I have not printed this yet but will start it in the few weeks. Also added a few surprises. The high MB files are in zip format. Also included are LED set up pieces for 5mm and 3mm if you want to use them.
I think I have everything uploaded, let me know if I am missing a component. There is just too many files for this project.
I have added the single cab files, but I will add the muffler system another time when I get to it.
UPDATE: 5/21/22
My bad, when I created the tires, I had made them directional. So, I added the corrected tires, all 4 files have been uploaded, Rev A for 15s and 17s
UPDATE: 5/08/22
Uploaded Rear tires, two sizes, first is a 15x15s and the second is 15x17s
UPDATE: 2/05/22
The model is about 85% completed, some things were a bit frustrating. I'll will slowly add more files, but it is still a work in progress. Added 3 types of Hoods, Stock, Cowl induction and Blower hood.
UPDATE: 11/23/21
Made a set of pedals for this truck, original file came from https://www.thingiverse.com/thing:4655106
I modified it to use for this truck.
UPDATE: 10/20/21
Not much of an update but tweak the design for another option build. A Pro- Street 69 four door C10 boulevard cruiser
UPDATE: 10/19/21
-Refined and corrected some areas of the truck bed, Rev F.
-Reworked the tailgate to have it a little pronounced lettering, Rev A plus separated the latch as an additional piece so it can be painted a separate color
-The rest of the parts are almost done.
UPDATE: 10/11/21
Uploaded Rev D, had to make clearance in the front of the truck bed for the frames to pass through.
UPDATE: 10/10/21
Uploaded Rev C for the Pro Street truck bed. Thicker panels and prints good now in 1/25th scale.
UPDATE: 10/09/21
Uploaded a revised truck bed, this time with wall supports, Rev B
UPDATE: 10/06/21
Revised the truck bed, made the walls a little thicker and smoother, Rev A for both Pro Street and stock beds. Also added the tailgate.
UPDATE: 10/02/21
Added the taillights and corrected the lens, Rev A has been uploaded. Uploaded file for the side markers as well
UPDATE: 9/25/21
Added the stock truck bed, this will have the options of stock hood, opened hood, cowl induction.
| 25th_Blower_hood.stl | 157.0KB | |
| 25th_Cowl_induction_hood.stl | 290.2KB | |
| 25_barefeet_Pedal_set.stl | 125.4KB | |
| 25_Stock_Hood.stl | 239.0KB | |
| 25__NS_SSP_15x15s_Rear_Left_Rev_A.stl | 14.7MB | |
| 25__NS_SSP_15x15s_Rear_Right_Rev_A.stl | 14.6MB | |
| 25__NS_SSP_15x17s_Rear_Left_Rev_A.stl | 14.4MB | |
| 25__NS_SSP_15x17s_Rear_Right_Rev_A.stl | 14.4MB | |
| battery.stl | 1.1MB | |
| battery_tray.stl | 339.5KB | |
| battery_tray_mirrored.stl | 339.5KB | |
| Bed_inner.stl | 250.0KB | |
| Bed_inner_stock.stl | 581.4KB | |
| Bed_outer.stl | 6.1MB | |
| Bed_outer_thickened_walls_recessed_lincense_plate.stl | 4.2MB | |
| Bed_outer_thicker_walls_no_license_plate.stl | 4.2MB | |
| Brake_booster.stl | 942.8KB | |
| Bumper_front.stl | 5.7MB | |
| Bumper_Rear.stl | 5.4MB | |
| Cab_Body.zip | 5.9MB | |
| Cab_Body_LED_Set_up.zip | 6.4MB | |
| Cab_Body_LED_Set_up_thickened.zip | 24.9MB | |
| Cab_Body_Single.stl | 4.2MB | |
| Cab_Body_Single_thickened.zip | 3.7MB | |
| Cab_Body_Single_with_fenders.stl | 4.5MB | |
| Cab_Body_Single_with_fenders_thickened.zip | 4.0MB | |
| Cab_Body_thickened.zip | 24.6MB | |
| Cab_Body_with_inner_fenders.zip | 6.0MB | |
| Cab_Body_with_inner_fenders_LED_Set_up.zip | 6.6MB | |
| Cab_Body_with_inner_fenders_LED_Set_up_thickened.zip | 25.5MB | |
| Cab_Body_with_inner_fenders_thickened.zip | 25.1MB | |
| CHEVY_HEADLIGHT_LENS.stl | 1.7MB | |
| CHEVY_WIPER_R.stl | 398.3KB | |
| Console_with_cup_holders_Rev_A.stl | 707.8KB | |
| Crewcab_roof_Rev_A.stl | 831.9KB | |
| Dash.zip | 4.0MB | |
| Dash_extra_gauges.zip | 4.5MB | |
| Disc_Brakes_Brembo_Driver.stl | 5.7MB | |
| Disc_Brakes_Brembo_Passenger.stl | 5.8MB | |
| Disc_Brake_Wilwood_11_inch_Driver.stl | 2.0MB | |
| Disc_Brake_Wilwood_11_inch_Passenger.stl | 2.0MB | |
| Doors_and_Hood_thickened.zip | 4.3MB | |
| Door_Crank.stl | 150.4KB | |
| Door_driver_front.stl | 175.7KB | |
| Door_driver_rear.stl | 166.3KB | |
| Door_Handle_A.stl | 282.3KB | |
| Door_Handle_B.stl | 279.7KB | |
| Door_panel_Driver_front_Rev_A.stl | 333.3KB | |
| Door_panel_Driver_rear_Rev_A.stl | 336.0KB | |
| Door_panel_passenger_front_Rev_A.stl | 329.7KB | |
| Door_panel_passenger_Rear_Rev_A.stl | 343.4KB | |
| Door_passenger_front.stl | 179.1KB | |
| Door_passenger_rear.stl | 165.6KB | |
| driver_door_with_window.stl | 1.7MB | |
| Driveshaft.stl | 2.8MB | |
| Driveshaft_single_cab.stl | 2.2MB | |
| e_brake_pedal.stl | 62.9KB | |
| Firewall.stl | 118.5KB | |
| Ford_9_inch_freebie_Rev_B.stl | 6.6MB | |
| Frame_Rev_B.stl | 2.5MB | |
| Frame_single_cab.stl | 1.7MB | |
| Front_Bumper.stl | 5.8MB | |
| Front_Seat.stl | 690.5KB | |
| Front_Seat_Rev_A.stl | 619.0KB | |
| gas_tank.stl | 366.9KB | |
| GMC_Tailgate_1-25th_rp.stl | 2.6MB | |
| Grill_front_LED_set_up_Rev_A.stl | 5.7MB | |
| Grill_front_Rev_A.stl | 4.7MB | |
| hood_no_badge.stl | 257.0KB | |
| hood_with_badge.stl | 903.3KB | |
| Hurst_shifter.stl | 184.9KB | |
| Inner_tub.stl | 1.4MB | |
| Inner_tub_single_cab.stl | 1.1MB | |
| McDonalds_cup.stl | 229.5KB | |
| mirror_left.stl | 226.6KB | |
| mirror_right.stl | 226.6KB | |
| Muffler_system_Rev_A.stl | 6.4MB | |
| Muffler_system_single_cab.stl | 6.0MB | |
| Night_Stone_Canopy.stl | 534.9KB | |
| original_sidemarker_enclosed.stl | 234.8KB | |
| original_sidemarker_hollow.stl | 70.1KB | |
| passenger_door_with_window.stl | 1.6MB | |
| Radiator.stl | 5.9MB | |
| Rear_bench_Seat.stl | 699.4KB | |
| rear_driver_door_with_window.stl | 1.8MB | |
| rear_passenger_door_with_window.stl | 1.7MB | |
| Rear_valance_no_license_plate_holder.stl | 225.8KB | |
| Reverse_light_driver.stl | 111.3KB | |
| Reverse_light_passenger.stl | 101.0KB | |
| Side_Markers.stl | 265.5KB | |
| Signal_light_Front_driver.stl | 5.6KB | |
| Signal_light_Front_passenger.stl | 4.6KB | |
| Snug-T_service.stl | 241.1KB | |
| Snug-T_windows.stl | 268.3KB | |
| Steering_Wheel.zip | 3.0MB | |
| Steering_Wheel_A.stl | 810.8KB | |
| Suspension_Front_Driver_Rev_A.stl | 1006.8KB | |
| Suspension_Front_Passenger_Rev_A.stl | 1.3MB | |
| Sway_bar.stl | 171.2KB | |
| Tailgate.stl | 4.3MB | |
| Tailgate_handle.stl | 28.9KB | |
| Taillights_Driver.stl | 207.4KB | |
| Taillights_Passenger.stl | 205.3KB | |
| Tail_light_housing_for_LED_Driver.stl | 157.9KB | |
| Tail_light_housing_for_LED_Passenger.stl | 157.6KB | |
| window_back.stl | 22.2KB | |
| Window_crank_A.stl | 1.9MB | |
| Window_Crank_B.stl | 125.3KB | |
| window_driver_quarter.stl | 5.6KB | |
| window_front_buck.stl | 33.8KB | |
| window_passenger_quarter.stl | 5.6KB |
