1:24 NZR DE 3D Printer Model
The file '1:24 NZR DE 3D Printer Model' is (stl) file type, size is 3.6MB.
The file '1:24 NZR DE 3D Printer Model' is (stl) file type, size is 3.6MB.
1:24 Scale NZR De Class
Designed in sections to fit my UP Plus 2 so should fit most printers.
Max Build volume 140 x 140 x 135mm
The power truck is a LGB 4 wheeler, i only used one in mine, but two is better.
I brought my chassis off ebay for $80 second hand, and $50 worth of ABS.
Even includes the driver
| 124_de_cab_controls.stl | 41.5KB | |
| 124_de_cab_control_lever.stl | 12.5KB | |
| 124_de_cab_control_lever_1.stl | 23.0KB | |
| 124_de_cab_end_window.stl | 1.4KB | |
| 124_de_cab_half_driver_seat_v1.stl | 684.0B | |
| 124_de_cab_inner_light_fitting.stl | 64.1KB | |
| 124_de_cab_inner_window_left.stl | 60.8KB | |
| 124_de_cab_inner_window_right.stl | 60.8KB | |
| 124_de_clas-airbrake_connectors_handrails_2.stl | 147.6KB | |
| 124_de_class_1.stl | 2.1MB | |
| 124_de_class_2.stl | 535.3KB | |
| 124_de_class_3.stl | 426.3KB | |
| 124_de_class_4.stl | 1.5MB | |
| 124_de_class_bogie_non_-_powered_2a.stl | 1.4MB | |
| 124_de_class_bogie_non_-_powered_2b.stl | 2.1MB | |
| 124_de_class_bogie_powered_2a.stl | 1.9MB | |
| 124_de_class_bogie_powered_2b.stl | 1.2MB | |
| 124_de_class_co_w_catcher_ends.stl | 103.2KB | |
| 124_de_class_Footstep.stl | 4.0KB | |
| 124_de_class_handrails_front.stl | 74.8KB | |
| 124_de_class_handrails_rear.stl | 128.0KB | |
| 124_de_class_handrail_side.stl | 18.5KB | |
| 124_de_class_Handrail_V3.stl | 18.3KB | |
| 124_de_class_nonpower_bogie_support.stl | 12.1KB | |
| 124_de_class_power_bogie_suppport.stl | 10.0KB | |
| driver_man_sit1.stl | 250.6KB |
