1/2″ To 6, 8, 10 Mm Tube Adapter 3D Printer Model
The file '1/2″ To 6, 8, 10 Mm Tube Adapter 3D Printer Model' is (stl) file type, size is 8.6MB.
The file '1/2″ To 6, 8, 10 Mm Tube Adapter 3D Printer Model' is (stl) file type, size is 8.6MB.
Used this for a water pump
Important to know.
It is almost impossible to print items that are really watertight. It must be expected that a few drops get lost. Luckily the extreme small holes get closed by itself over the time. Maybe by dirt in the water or whatever. Se the picture.
I grind the insert adapters a bit to flatten the surface on the sides for more precise fit.
To get it quite OK, you may increase the shell thickness in the slicer. I did from 2 to 4 layers.
More info about that you find here :
https://help.prusa3d.com/article/watertight-prints_112324
May you like also my other watering projects:
https://www.thingiverse.com/thing:6061554 (tank adapter)
https://www.thingiverse.com/thing:6619348 (t-adapter)
https://www.thingiverse.com/thing:6128733 (that one is older)
| Insert_Adapter_10mm_v1.3.stl | 176.0KB | |
| Insert_Adapter_6mm_v1.3.stl | 1.1MB | |
| Insert_Adapter_8mm_v1.3.stl | 1.0MB | |
| Pump_Connector_V1.8.stl | 17.2MB |
