12 Foot Skeleton ROTATING Arm Head Bracket Adapter 3D Printer Model
The file '12 Foot Skeleton ROTATING Arm Head Bracket Adapter 3D Printer Model' is (stl) file type, size is 227.5KB.
The file '12 Foot Skeleton ROTATING Arm Head Bracket Adapter 3D Printer Model' is (stl) file type, size is 227.5KB.
PLEASE remember that this design and derivatives of this design are meant for personal use only!!!
This is a replacement for the lower arm or neck adapter of the Home Depot Skeleton (Skelly) to allow for these joints to rotate.
This is a print in place part, meaning the two pieces print together and can't be separated.
You will need to print two clips (V2_Arm_Adapter_Plate.stl) from the original adapter here: https://www.thingiverse.com/thing:4974267
There are two set screws that help to prevent the part from freely rotating when you don't want it to. These need to be screwed in when clipping the arm in place.
Hardware required; 4x M3x15 screws (or similar) for the clips. 2x M3x8 (or longer) set screws.
Let me know how it goes and I can try to make changes if needed.
I recommend PETG or ABS especially if you are in a warmer climate as PLA may deform.
| V1_Rotating_Adapter_Plate.stl | 601.8KB |
