This is a remix from: https://www.thingiverse.com/thing:3873672/remixes
I made a drawer with 12 compartments for the "BoxMiddleMiddle_2x2x2.stl" on the original post.
I made this using the provided "Drawer_2x2x2_six_compartments.stp", I just add 6 extra walls between the compartments, no changes on size, this means you can print with the same config you used to print the 6 compartments one.
This is ideal for low amount of axial components like under 30.
To pick up a component from the drawer you will use 1 finger and place a little pressure between your finger, the component and the wall of the compartment, then you will slide the component up.
| Drawer_2x2x2_12_compartments.stl | 918.2KB |
