1/2” 90º Flush Elbow W Shouldered Pixel 3D Printer Model
The file '1/2” 90º Flush Elbow W Shouldered Pixel 3D Printer Model' is (stl) file type, size is 538.0KB.
The file '1/2” 90º Flush Elbow W Shouldered Pixel 3D Printer Model' is (stl) file type, size is 538.0KB.
Elbow designed to fit flush with PVC Sch 40 pipe, especially for window frames for holiday lighting with pixels.
If you’re using 1” spacing on your bullets the last pixel before the corner actually locks the corner to the PVC! Probably need to make a 1-1/2” and 2” spaced version, too. The corner hole is a shouldered hole, so only the nipple of the corner pixel pokes through, as a full-sized hole left the corner a bit too weak.
| Half_Inch_90º_Flush_Elbow_1.stl | 1.6MB |
