This is a set of small bridge "planks" that can be printed to make a bridge any size you want. All of the planks are wide enough for a 1/18th scale crawler and smaller. They have a 4mm passthrough hole for the "rope" sized to fit standard 550 paracord.
Current planks:
I added some spacers, both whole (slide on between the planks) and split (slide on ot off after the bridge has been made). The spacers aren't tested so if they need some fine tuning let me know.
I might add more as I continue modeling parts for my crawler course.
Print flat and no supports needed.
If you are having trouble getting the paracord through the holes, I found this video useful:
https://www.youtube.com/watch?v=xi56_icWKrk
OTHER RC MODELS
RC bridge can be found here: https://www.printables.com/model/600421-118th-scale-crawler-bridge or https://www.thingiverse.com/thing:6206353
RC whoops here: https://www.printables.com/model/600420-118th-scale-whoops or https://www.thingiverse.com/thing:6206362
RC Rope bridge here: https://www.printables.com/model/600418-118th-scale-crawler-rope-bridge-pieces or https://www.thingiverse.com/thing:6206529
RC Teeter Totter here: https://www.printables.com/model/613825-118th-scale-teeter-totter or https://www.thingiverse.com/thing:6264443
| Lightweight_Bridge_Piece.stl | 2.2MB | |
| rope_bridge-_10_Mm_Spacer_Split.stl | 39.5KB | |
| rope_bridge-_10_MM_Spacer_whole.stl | 56.3KB | |
| rope_bridge-_15_mm_Spacer_Split.stl | 39.5KB | |
| rope_bridge_-_15_mm_Spacer_Whole.stl | 56.3KB | |
| rope_bridge_-_25_mm_Spacer_Split.stl | 39.5KB | |
| rope_bridge_-_25_mm_Spacer_whole.stl | 56.3KB | |
| Rotting_bridge_piece.stl | 1.0MB | |
| Skeleton_bridge_piece.stl | 219.2KB | |
| Standard_Bridge_Piece.stl | 193.5KB |
