1/16 Electric Violin For Small Printer 3D Printer Model
The file '1/16 Electric Violin For Small Printer 3D Printer Model' is (STL,stl) file type, size is 8.8MB.
The file '1/16 Electric Violin For Small Printer 3D Printer Model' is (STL,stl) file type, size is 8.8MB.
Remixed from @mccand's design
Cut the middle parts into two for 150x150x180mm 3D printer
Join the parts with M3 screws (4 x 20mm and 3 x around 30mm long screws) and M3 heat set insert.
Just use 4 pegs. The fifth peg for pulling the parts together are no longer needed. The hole for it is also filled.
I also removed the piezoelectric pickup as it's for my son to learn violin. Silent violin should be enough.
I am using following 3D printed peg
https://www.thingiverse.com/thing:6792411
I have no fibre rod on hand. So I use a strong chopstick (made from wenge wood). I think stainless steel chopstick can also do.
Support for fingerboard may also needed unless the max height of the 3D printer is larger than 180mm.
| EPV_1-16_Bridge_R2.STL | 240.7KB | |
| part_1.stl | 25.5MB | |
| part_2.stl | 496.2KB | |
| part_3.stl | 834.6KB |
