I wanted an engine (fake) to sit over my stock Tamiya 1/14 trucks gearbox and servos.
This is designed to fit over a stock Tamiya 1/14 King or Grand hauler gearbox + servos.
Please note: The Chassis rails isn't included, i just used these as a reference. Also I didn't use the blocks as mine was nice and tight sitting over the motor
| Font_PipePrintx2.stl | 2.7MB | |
| Front_Housing.stl | 724.4KB | |
| Housing_Top.stl | 525.5KB | |
| L+R_ExaustPrintx2.stl | 139.0KB | |
| L_Bracket_Set.stl | 260.2KB | |
| L_Pipe_Holder.stl | 456.6KB | |
| L_Pipe_work.stl | 7.7MB | |
| Oil_Can.stl | 3.6MB | |
| Radiator.stl | 885.5KB | |
| Radiator_12mm_Longer.stl | 887.5KB | |
| Radiator_Fan.stl | 691.8KB | |
| Rear_Housing.stl | 1.4MB | |
| R_Bracket_Set.stl | 260.2KB | |
| R_Pipe_Holder.stl | 456.6KB | |
| R_Pipe_work.stl | 7.7MB | |
| Side_PipePrintx2.stl | 128.3KB |
