A model of the SpaceX Falcon 9 - Block 5 rocket with Crew Dragon. I designed this model in Fusion 360 and also included the Fusion and Step parts. So if someone would like to make alterations or additions, feel free to do so and dont forget to upload some fotos :)

• 63 cm Length
• High Details
• All Stages separable
• No Supports needed!
• Fully Tested
• Landing legs and Grid-Fins deployable

I printed mine with 3 colours of PLA on Ender 3 with 0.2mm Layer height

Notice: For the Grid-Fins use 0 Top and Bottom Layers and only Infill Pattern!

UPDATE! 09.07.2020

As it was requested i rescaled the model in Fusion to fit 1:96 scale. I added the resized STL-files as a zip-File.
This makes the Model appr. 72cm tall.
The parts are not tested yet but as it is just slightly bigger i dont see any issues concerning printability.

UPDATE! 10.07.2020

I updated the stage 2 vakuum engine to make it a bit more realistic. See screenshot above.

UPDATE! 08.12.2020

I have added a wall mount. Falcon 9 can be easily clipped in and out. Now also available for the 1:96 sized model.

UPDATE! 05.01.2021

I have added an optional fairing with payload adapter to replace the Dragon space ship.
I have test printed all parts. Print the fairing standing upright. No Supports needed. Mine was sticking fine to the bed despite the small contact area. However if you should have problems just add a brim or raft.

Will be adding some kind of payload in the future. If you have suggestions feel free to tell me in the comments :)

UPDATE! 21.02.2021

Added some payloads for the Fairing version:

• A stack of StarLink sattelites
• A Tesla Roadster (Model is a remix of the tesla model from "AntsinAfrica" that has been scaled to fit my model. See https://www.thingiverse.com/thing:4584886 for license infos)