1/10 Scale RC Snow Wheels 3D Printer Model
The file '1/10 Scale RC Snow Wheels 3D Printer Model' is (stl) file type, size is 87.5KB.
The file '1/10 Scale RC Snow Wheels 3D Printer Model' is (stl) file type, size is 87.5KB.
These wheels were designed around my Traxxas Slash 2WD. In addition to these, I have designed a small set of skis for the front on the 2WD Slash. In addition to these wheels I have designed a set of front skis as well. Since there is only one wheel and they are directional, you will have to mirror them for the other side.
Edit: 12/27/17
So I decided to recreate the wheel to better the print time and change how it worked. The paddles are now deeper, there are less of them and the overall wheel is smaller. Now with this change, the wheels work better and are much lighter and easier to print. The only thing is you may have to drill out the hole for the axle with a drill bit but after that they work great.
Link to the front skis:
https://www.thingiverse.com/thing:2727400
| Wheel_New.stl | 291.7KB |
