1/10 RC Toyota Hilux Detailed Body Set 3D Printer Model
The file '1/10 RC Toyota Hilux Detailed Body Set 3D Printer Model' is (STL) file type, size is 5.5MB.
The file '1/10 RC Toyota Hilux Detailed Body Set 3D Printer Model' is (STL) file type, size is 5.5MB.
INNER BODY STRUCTURE ONLY PLEASE READ
Tamiya, RC4WD or HG Hilux body will need to be purchased to complete this model.
Hello and welcome to the 1/10 scale Toyota Hilux (third gen) inner body panel set.
This model was designed using the HG P407 shell as the base. This shell is a clone of the Tamiya Hilux, bruiser, mountaineer and RC4WD Mojave cab. As such the model should match up with all the aforementioned RC bodies..
To install this kit the body will have to be cut into separate sections. This can be done using many methods however I found using a sowing thread to cut through the ABS shell was the best technique.
The parts should be printed in ABS for durability and resistance to temperatures from motors and ESCs.
This model was designed so that all of the original panels can be re attached to the body. How those panels are attached is up to the builder.
Some components must be mirrored on the slicing software to complete a right and left side.
The RC hobby is a huge passion of mine and one I would love to see grow with designs I make for everyone to enjoy for free :D . If you've enjoyed printing this design and would love to see more RC related items being created, consider tipping the designer, it would be greatly appreciated and would help expand the products available.
If you've any suggestions on items you would like to see in future relating to RC crawlers and Tamiya, please leave a comment below and dont forget to POST YOUR MAKES! :D
| Assem2.STL | 5.4MB | |
| body_mounts_Cab_v2.STL | 186.7KB | |
| door_jam.STL | 1.3MB | |
| door_jam_forward.STL | 11.6KB | |
| Door_line.STL | 20.8KB | |
| door_sill.STL | 491.8KB | |
| firewall_panel_with_support.STL | 1.7MB | |
| firewall_shield.STL | 72.9KB | |
| floor_joints.STL | 19.6KB | |
| floor_panel.STL | 711.3KB | |
| Inner_feders.STL | 2.0MB | |
| Radiator_core_support.STL | 1.3MB | |
| Rear_panel.STL | 695.9KB | |
| Slam_panel.STL | 1.1MB |
