1:1 SCALE ZF1 REMIX FOR PRINTERS 300 X 300 X 400 (JUST 4 PARTS) 3D Printer Model
The file '1:1 SCALE ZF1 REMIX FOR PRINTERS 300 X 300 X 400 (JUST 4 PARTS) 3D Printer Model' is (stl) file type, size is 18.3MB.
The file '1:1 SCALE ZF1 REMIX FOR PRINTERS 300 X 300 X 400 (JUST 4 PARTS) 3D Printer Model' is (stl) file type, size is 18.3MB.
Always wanted to print this but not take months doing it.
Now there are just 4 Pieces and one tiny piece thats it.
This took about 2 weeks. Print with support. All the files are watertight.
Enjoy.
To help me finish my projects faster for PLA.
It helps me out a lot
Thank you
I am also now working on a huge robot project check it out here
https://www.thingiverse.com/3d_printing_doctor/designs
As all printers are built differently so I tend to leave settings out. Infill you can print it with 5 percent. Outside walls are more important for strength. Print at lest 3 to 4.
And have your support settings dialed in if you have a hard time ripping supports glued to your prints. Then i would recommend trying the remixed version smaller parts to test.
File the contact surfaces to roughen them up add super glue (this will not glue it together yet) weld the seams with a soldering iron.
Then over night the super glue will then cure over 24 hours creating a weld bond.
Happy making makers
| 1_ODD_PIECE_TO_GLUE_STL.stl | 94.9KB | |
| BOTTOM_1_STL.stl | 3.6MB | |
| BOTTOM_2_STL.stl | 24.8MB | |
| TOP_1_STL.stl | 5.8MB | |
| TOP_2_STL.stl | 8.4MB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
