Used as a concept to create my version of the meter, with clear visible numbers and Assembly on m3 bolts.
Printing without supports, use the bridge function (holes are printed in one 0.2 mm layer, which is then easy to remove).
Change color at 23 layer.
Used m3 screws with a length of 6 mm, the cap diameter 6.5 mm, nut m3, height 2.5 m, turn-key 5.5 mm (standard).
| counter_assembly.stl | 12.4MB | |
| down.stl | 1.2MB | |
| up.stl | 1.1MB | |
| wheel1.stl | 5.0MB | |
| wheel2.stl | 5.0MB |
