10 Inch Touch Screen Display Case 3D Printer Model
The file '10 Inch Touch Screen Display Case 3D Printer Model' is (scad,stl) file type, size is 69.1KB.
The file '10 Inch Touch Screen Display Case 3D Printer Model' is (scad,stl) file type, size is 69.1KB.
This is a case for a 10.1 inch touchscreen display case. This specifically works with a HAMTYSAN display. These are commonly purchased through Amazon for under $60. The dimensions of this monitor are 235mm x 145mm, with a board and connectors on the back of the display that makes the maximum depth 20mm.
You can modify the OpenSCAD file to include text on the display stand, or make other adjustments as desired.
The back is attached to the front of the case using small (#4) 1/2 inch wood screws.
Note: This requires a 3D printer with a bed size of at least 250mmx250mm. I used a K1 Max.
| TouchScreenDisplayCase10.scad | 2.4KB | |
| TouchScreenDisplayCase10back.stl | 33.3KB | |
| TouchScreenDisplayCase10front.stl | 11.0KB | |
| TouchScreenDisplayCase10HOstand.stl | 133.1KB | |
| TouchScreenDisplayCase10stand.stl | 1.6KB |
