10 Inch Serverrack, Covers And Base 3D Printer Model
The file '10 Inch Serverrack, Covers And Base 3D Printer Model' is (stl) file type, size is 83.7KB.
The file '10 Inch Serverrack, Covers And Base 3D Printer Model' is (stl) file type, size is 83.7KB.
This Thing combines multiple covers, brackets and baseplates for a DIY 10 inch rack. For the rails, various lengths can be used. Also standard power supplies or other devices with premounted brackets with a width of 10 inches (e.g switches or routers) can be mounted to the rack.
Take 4 rack rails of the same length and screw them onto a baseplate. Now take a second baseplate and screw it to the top of the rails. Optionally you can add felt gliders to the bottom of the lower baseplate.
2x baseplate
4x rack rails: 2pcs server rails
8x screws with cage nuts: 50pcs cage nuts
All modules in this Thing have a width of 10 inch and can be mounted to the rack. They are named by the part and the height in Units (U).
Please have in mind to add supports for the cablemanager before printing.
The tray can be secured to the front and back rail for higher stability.
Length: 254mm
Width: 254mm
Height: Units*44.5mm+4mm
Is your 3D-printer too small? Don't own a 3D-Printer? I can help you out! All printed parts are available on my Ko-fi!
| base_0.5U.stl | 28.2KB | |
| cablemanager_1U.stl | 147.9KB | |
| cover_0.5U.stl | 15.9KB | |
| cover_1U.stl | 34.7KB | |
| cover_2U.stl | 63.9KB | |
| tray_1U.stl | 161.6KB |
