1 Inch Picatinny Mount 3D Printer Model
The file '1 Inch Picatinny Mount 3D Printer Model' is (FCStd,stl) file type, size is 92.4KB.
The file '1 Inch Picatinny Mount 3D Printer Model' is (FCStd,stl) file type, size is 92.4KB.
Picatinny mount with a diameter of 25 mm for mounting a scope, bullet camera or (infrared)light source to a gun.
The mount is slightly smaller then the rail and a 1 inch scope. You have to sand it to allow for a tight fit and cut the mounting ring parallel to the barrel to insert a scope or other object.
There are 2 holes either for 2 2mm screws or a cable strip to fasten the mount to the rail and the scope or camera.
Warning: Mounting a light source to a gun is illegal many european countries and especially Germany. In Germany the mounting bracket is allowed though, because it can be used for a scope or a dummy ( at example when you glue a plastic cylinder like an old uhu stick into the mounting bracket like on the last image). If you want to use the mount for movies or in collecting guns and mount a light to it you have to fill the light it with epoxy or something if you want to do it legally in Germany.
The gun depicted is an airsoft gun.
Edit: erroneous .stl replaced
Edit: included netfab version
| 1_inch_picatinny_mount.FCStd | 73.2KB | |
| 1_inch_picatinny_mount.stl | 35.8KB | |
| 1_inch_picatinny_mount_netfab_version.stl | 35.4KB |
