1 Axis Camera Tilt Mount 3D Printer Model
The file '1 Axis Camera Tilt Mount 3D Printer Model' is (stl) file type, size is 291.1KB.
The file '1 Axis Camera Tilt Mount 3D Printer Model' is (stl) file type, size is 291.1KB.
This is based on the 1-Wege-Stativneiger, 1 Way Tilt Head by TASPP. I wanted to use it with my camera slider, but needed it to be a little more rigid since the camera was moving.
I also changed it to work with m8 bolts for the tightening knob, and 3/8" for the tripod and camera connections.
Requires 2 m8 x 45 bolts, 2 m8 nuts, 1 3/8" nut, and one tripod camera screw on top (I used 3/8" but either should work). Some of them are tight fits, but lets say that was intentional.
| tilt_mount_base_plate.stl | 293.3KB | |
| tilt_mount_knob.stl | 286.4KB | |
| tilt_mount_top_plate.stl | 377.1KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
