UPDATE 9-FEB-2019

New version of rims that are 2mm thicker where they bolt up to the axle. The reinforcing ribs on the rear have also been slightly re-designed to be easier to print.
These are the files that end _V2.

UPDATE 29-JUN-2018

New version of rims and bead locks uploaded in 5, 6, 8 and 10 bolt versions. If you're printing the bead locks rather than using metal ones, you might want to use the 8 or 10 bolt version as the bead lock can warp over time depending on the filament, bead thickness, exposure to heat, and so on.
The new files are named 1.9_Vector_xBolt.stl and include both the rim and bead locks, but I've left the old files in case anyone wants them.

This is a 1.9" beadlock rim to replace the stock wheels on an Axial SCX10 or other crawler/scaler with a 12mm wheel hex. The rim dimensions are the same as the stock Axial 8-hole rims, so you can still use Axial wheel weights if you run them. The bolt pattern on the 6-bolt rims is also compatible with the stock metal Axial bead lock rings.

There are versions to support different numbers of bolts depending on the look you want, with corresponding beadlock rings.

You'll need M2 cap or dome head screws in (ideally) a 10mm or longer length.

If you have any suggestions or feedback on the designs, especially if you've run them, please let me know.

Enjoy!