1.750″ Exhaust Header Fabrication Kit – 79.4mm CRL 3D Printer Model
The file '1.750″ Exhaust Header Fabrication Kit – 79.4mm CRL 3D Printer Model' is (STEP,STL) file type, size is 45.4MB.
The file '1.750″ Exhaust Header Fabrication Kit – 79.4mm CRL 3D Printer Model' is (STEP,STL) file type, size is 45.4MB.
Same design as my original 1.75" dia fabrication kit. Identical snap system. These 1.750 parts will snap onto the 1.625 parts.
The blocks incorporate a 79.4mm Center line radius (3.126" CRL)
Alignment notches are every 22.5deg as well.
Basic parts included:
1" long straight
1" long straight with dead-end
10 deg - 79.4mm CRL
15 deg - 79.4mm CRL
22.5 deg - 79.4mm CRL
30 deg - 79.4mm CRL
45 deg - 79.4mm CRL
With these variety of bend angles, you can create almost any radial bend you could need
The STL files are high resolution, 10-20mb each.
Special thanks goes to "Robbosham" for the request. :)
| 1.75_10deg_79.4mm_center_line_rad.STEP | 2.2MB | |
| 1.75_10deg_79.4mm_center_line_rad.STL | 16.3MB | |
| 1.75_15deg_79.4mm_center_line_rad.STEP | 2.3MB | |
| 1.75_15deg_79.4mm_center_line_rad.STL | 16.8MB | |
| 1.75_22.5deg_5.5in_center_line_rad.STEP | 2.3MB | |
| 1.75_22.5deg_79.4mm_center_line_rad.STEP | 2.4MB | |
| 1.75_22.5deg_79.4mm_center_line_rad.STL | 17.9MB | |
| 1.75_30deg_79.4mm_center_line_rad.STEP | 2.4MB | |
| 1.75_30deg_79.4mm_center_line_rad.STL | 18.4MB | |
| 1.75_45deg_79.4mm_center_line_rad.STEP | 2.3MB | |
| 1.75_45deg_79.4mm_center_line_rad.STL | 18.8MB | |
| 1.75_Straight_1in.STEP | 3.2MB | |
| 1.75_Straight_1in.STL | 3.8MB | |
| 1.75_Straight_1in_deadend.STEP | 3.1MB | |
| 1.75_Straight_1in_deadend.STL | 3.2MB |
