A 12-Eppendorf microcentrifuge tube rack/tray designed to be compatible with your ice bucket!
The outer diameter of 1.5mL Eppendorf microcentrifuge tubes is approximately 10.9mm by my measurements. However, when printing with a 0.8mm nozzle, I had to design the holes as large as 12.2mm for the eppendorf tubes to fit easily. I have not tested the files designed for printing with a 0.4mm diameter nozzle or a SLA printer. If you print with either of those, please give me feedback on whether the holes were too tight or loose! I included FreeCAD files so most everyone can change the design. In the FreeCAD files, the sketches titled "Sketch" and "Sketch001" both need to be edited to increase or decrease the hole size.
| amf_and_freecad.zip | 382.2KB | |
| Eppendorf_rack_11.2mm_holes_for_SLA.stl | 160.4KB | |
| Eppendorf_rack_11.6mm_holes_for_0.4mm_nozz.stl | 160.4KB | |
| Eppendorf_rack_12.2mm_holes_for_0.8mm_nozz.stl | 162.8KB |
