1-12 Cell Holder For Charging 18650-cells 3D Printer Model
The file '1-12 Cell Holder For Charging 18650-cells 3D Printer Model' is (stl) file type, size is 422.3KB.
The file '1-12 Cell Holder For Charging 18650-cells 3D Printer Model' is (stl) file type, size is 422.3KB.
Based on http://www.thingiverse.com/thing:439657
I needed to charge 6x 18650 cells at a time using my iMax B6.
As I am new to 3d-printing and have no experience using Sketch-up I recreated the design in Tinkercad with 6 slots and some helper-items. Those are not in the .stl file, only the actual case is.
Springs were harvested from old single-cell holders. Bolts, nuts, washers and cableshoes are size M4.
As requested I have redone the model in Fusion 360 based on this video: https://youtu.be/Zn1pGBm67wo regarding dynamic design.
I have uploaded sizes 1-12 cells. The dimensions are as follows:
Size 1 cell: 88 x 27,5 mm
Size 2 cells: 88 x 51 mm
Size 3 cells: 88 x (just keep adding 23,5 mm for the rest of the sizes)...
If you need larger sizes or you have a small printbed, just print two versions and glue them together afterwards.
For some reason Fusion 360 insist on exporting the box on its side, so sorry about the previews. Just lay them flat in your slicer.
| 18650_batt_holder_x6.stl | 47.6KB | |
| 18650_charger_-_size_1.stl | 44.2KB | |
| 18650_charger_-_size_10.stl | 312.0KB | |
| 18650_charger_-_size_11.stl | 342.7KB | |
| 18650_charger_-_size_12.stl | 373.3KB | |
| 18650_charger_-_size_2.stl | 73.7KB | |
| 18650_charger_-_size_3.stl | 102.8KB | |
| 18650_charger_-_size_4.stl | 134.7KB | |
| 18650_charger_-_size_5.stl | 168.2KB | |
| 18650_charger_-_size_6.stl | 196.0KB | |
| 18650_charger_-_size_7.stl | 224.9KB | |
| 18650_charger_-_size_8.stl | 253.8KB | |
| 18650_charger_-_size_9.stl | 282.2KB |
