The MAZ- 537 is a 12-cylinder diesel engine-powered military truck artillery tractor, originally designed for loads up to 50 tons (using semitrailers such as the ChMZAP-9990 or ChMZAP-5247G, for example) with later versions providing a maximum load of 65 tons. It was manufactured by the Minsk Automobile Plant (from 1959 to 1965) and the Kurgan Wheel Tractor Plant from 1963 until halt of production in 1990.

The metal cab of the MAZ-537 provides space for the driver and 3 passengers for a total of four occupants, has two access doors on the side and a roof hatch, and is equipped with additional engine-independent heating. The 537G modification version is characterized by the addition of a winch to facilitate loading and unloading, as well as enabling self-extraction when stalled in adverse terrain (like mud). The working cable length of the winch is 100 meters, and the winch is able to provide 15 tons of traction.

The vehicle is powered by a 12-cylinder D-12A-525A diesel engine located directly behind the cab. This engine provides preheating as well. The drivetrain of the MAZ-537 consists of a hydrodynamic transmission transferring power to the two front axles over a torque converter and a planetary three-stage gearbox with assisted steering (power steering) gear.

The MAZ-537 has been widely used in both military roles (as, for example, artillery tractor trailer (pulling rocket or (ballistic) missile launchers), tank transporter, and airfield tractor) and in the civilian sphere as heavy tractor trailers, tractor ballast (or secondary unit) for carrying extra heavy loads, and in oil and gas fields.

This turned out great in my resin printer except I tried to print it with too many supports underneath and they became a solid block, otherwise everything came out nice and crisp. So give a slight angle and not so many supports when you go to print it.

And yes, I am aware that the centre wheels touch the fender, this was done intentionally to help support both the fender and wheel as my very first print this proved to be a weak spot and one of the wheels snapped off. Once printed and painted it shouldn't be that noticeable.